Tut by Wynters Wonders using my kit It's A Witch Thing.

Wynter used my kit and made this wonderful tag. You can see this tut and also other tuts done by her. Thank you again Wynter.
See this and other tuts on her blog HERE

BCA Tut FTU

You will need my BCA kit that you can find HERE
You will also need a BCA tube of choice. I'm using one I bought from MPT, but you can also now find Elias tubes HERE
I'm also using my BCA template and gradient you can get off my scrap blog HERE
Pretty script font of choice or MarmaladeJF which I used and you can get FTU HERE
Eyecandy-4000-Gradient Glow and Xero-Porcelain.

Lets begin!!

Open my BCA template-Shift+D and close out the original template.
Remove my credit layer and also the pink ribbon.
Raster4 add paper01 and add a gradient glow.
Add a drop shadow. I used 1,1,80,5
Next layer I added paper03 and a gradient glow.
Add another drop shadow.
Raster3 add my BCA gradient or paper07 and a gradient glow.
Add drop shadow.
Raster2, leave alone for now.
Word circle, you can change the color or add a gradient glow and drop shadow.
Add your tube as a new layer.
Back to raster2.
Add a close up of your BCA tube add a new layer.
On raster2 layer do the fallowing:
Selections-float-defloat-invert-delete the close up layer.
Duplicate your closeup tube layer.
On the bottom layer Adjust-Blur-Gaussian Blur-5 and add Xero-Porcelain.
Make sure all the colors are 0.
On the top layer, play around with your blend mode.
I used Hard Light.
Lower opacity to 60%- add porcelain again and merge down.
Add a slight drop shadow.

Lets decorate!!

Grab flower 1 and 2.
Re size flower01-roate-free-15%-right and place as a new layer just under the large circle and add a drop shadow.
Duplicate-Mirror.
Do the same again for flower02 as above and repeat again for flower01.
Look at my tag for ideas.
Add flair01- re size 55%-rotate-15%-right-free and place as a new layer.
Drag your flair layer just below the word circle.
On the word circle layer grab the pink sneakers-re size- 50% and place in front of the flair as a new layer and add a drop shadow.
On the tube layer add butterfly01-re size-40%-rotate-free-left and place on top of a flower of choice.
Merge visible.
Add your copyright and license info and your done.
Enjoy!!

Autism Speaks-FTU-Crafted By Gina

I'm using a wonderful FTU kit of Gina's called Autism Speaks, you can get it on her blog HERE

I'm using the wonderful work of Elias Chatzoudis and you can get his tubes HERE

I'm using a mask of Vix from her goodies section which you can find on her tut site HERE

You will need a font of choice too.

Ok......Lets begin!!

(This is a rather large tag and you can resize if you wish at the end of the tut.
I prefer to work on a larger scale.)

Grab paper02, copy and paste as a new image.
Add your mask and merge group.

Add 2 new layers and on the top layer grab vine01 and place in the center of the mask, copy, paste, mirror and place.
On the middle layer add the close up image of your choice.
Using your majik wand and click on the center of the vine frame we made.
Selections-Modify-Expand-3-Invert and delete the tube layer.
Playing with the blend mode, find a blend you like.
I used hard light.

Merge visible and add your tube as a new layer and mirror, if you want.

Grab flower06 and place behind your tube.
Grab the puzzle pieces and place to the left of your tube.
As a new layer, grab the autism word art re size 55% and place it so it reads AUTISM SPEAKS.
I added a gradient glow.
Grab flower05, resize 55%, mirror, and place above the white flower you just added and also below the white flower too.
You are going to use the same yellow flower and place right above the puzzle pieces.
Grab butterfly02, resize 65%, rotate free-15 degrees- right and place near a flower.

Add your copyright and license info and ENJOY!!

Garv: Naughty/Nice Set

For this tut you will need a tube of choice.
I'm using the fabulous work of Keith Garvey and you can get all his tubes at PTE.
You will need 2 fonts of choice.
You can get a ton of FTU fonts at DaFont. I used a ding font for part of this tut called LP Snowflake.
Also, Alien Skin-Xenofex2-Constellation.
Also, Mura's Copies
Eyecandy 4000-Gradient Glow.

That's it and this is another easy one!!

Open a new image 600x300 and also 150x150.

Use the dropper and grab a color from your tube and fill.

Use the ding font and select a snowflake and convert to rater image.
Open the Mura's copies-**Wall paper. (It's in the preset part of the plug-in.)

Use the preset shape tool and draw out a rectangle of the full length of the tag.
Convert to a raster layer-adjust-noise-uniform-6%.
Add another layer and on the left said type in NAUGHTY and on the other side add NICE-convert to rater layer-add slight drop shadow.

Paste your tube and don't forget to add a drop shadow.
Add a white gradient glow and a drop shadow.

Add your final layer and add your border.
Selections-All-Modify-Boders-6-Both Sides.
Fill the outer with a color from the tube-adjust-noise-25%-uniform.

Add your copyright-license number-person receiving the tag.

Lets animate!!!

Take your majik wand and click on the white fur of the tubes hat and collar.
Open the constellation plug-in and play around with the settings.

Copy-paste as new image in your animation shop.
Go back and do the same step again.
Copy-paste before current.
Do the first step again until you have 3 frames total.

View your animation and your done.

Go to the 150x150 image-fill with color from tube.
Add tube and resize tube to fit image.
Add a white gradient glow and a drop shadow.

Selections-modify-borders-6-both sides.
Noise-25%-uniform.

Add copyright and license number.
Do the same animation as above or keep as non animated and your done!!
Enjoy!!